In this episode, I build an arched-top, custom-built-in bookshelf for my Colorado Springs Custom Furniture Client. The frame and shelves are made from walnut, while the back walls and sides are painted with reflective paint that reflects the LEDs integrated into the bookshelf’s frame.
Summary
Project Build: Arch Top Built-In Bookshelf with LED Lighting
This week, I tackled a beautiful arch-top built-in bookshelf for a client. The design features LEDlit shelves, requiring careful planning to hide the light strips while maintaining a clean, seamless look. Here’s how I approached the build:
Tracing the Arch & Creating the Template
- I started by visiting the client’s home with a poster board to trace the arch shape.
- To conceal the LED strips, the outer trim needed to overhang the drywall by about an inch.
- After measuring and marking, I used a compass to transfer the arch shape, adjusting for the trim thickness.
- A razor blade helped cut out the template, which I then transferred to plywood for a rigid pattern.
Cutting & Refining the Arch
- The miter angle was the most critical, so I cut that first before moving to the bandsaw.
- I left the line slightly proud to refine the shape through careful sanding.
- Since the arch is the focal point, I took extra time to ensure smooth curves, using chalk to highlight imperfections and sanding them away.
Constructing the Arch in Segments
- Rather than using one wide piece, I built the arch in segments, paying attention to grain direction for a seamless flow.
- After a test fit, I joined the pieces with dominoes and epoxy (stronger for longgrain joints).
- Soft pine glue blocks with CA glue helped secure tricky shapes during clamping, ensuring even pressure for a flat, straight result.
Final Shaping & Assembly
- Once dry, I removed the glue blocks and sanded off excess adhesive.
- Using a bandsaw, I refined the shape, then used a router with a pattern bit for clean edges (starting cautiously to avoid catches).
- The sides were milled to thickness, ripped to width, and cut with matching miters for the arch.
Installing the Shelves
- Each shelf was glued up from quarter material and cut to fit the alcove width.
- I added a dado on the sides to slide over wallmounted cleats for support.
- A fascia piece was glued to the underside to create an overhang, hiding the LED strips.
While I built the components, the client had their electrician run wiring for the lights, and their painter applied a metallic paint/plaster mix to the alcove walls, enhancing light reflection. This project was all about precision—from the arch shaping to the hidden LED details. The final result? A stunning, functional bookshelf that blends seamlessly into the space!
More Project Build Videos
Building a Dr. Seuss Inspired Coat Rack
How a straight 4x4 becomes a whimsical, Dr. Seuss-inspired coat rack using a band saw inside-out cutting technique, plus a hand-cut castle joint base.
Building a Fireplace Mantel
In this episode, I designed and built a Craftsman-style fireplace mantel for a client in Colorado Springs. The mantel was made from hickory and stained to match some of the other millwork in the house.
Building Modern Contemporary Doors
In this episode, I build a whole house of Modern Contemporary Doors featuring a stainless steel accent for my Colorado Springs client's home.
Asymmetrical Shelf Build
I recently completed an asymmetrical shelf unit for a client, and let me tell you, it was one of those projects that looks simple on the surface but requires serious attention to detail from start to finish.
Installing a Door Lock on a Custom Door
I have installed Door locks of all varieties over the years, from different setback to full mortise locks. In this episode, I show how to install a door lock and deadbolt set for my custom copper door project. This was a custom door for a client in Evergreen, Colorado, just outside of Denver.
Building a Nakashima-Inspired Live-Edge Walnut Table
Crafting a live-edge walnut table inspired by the legendary woodworker George Nakashima. The build combines traditional joinery techniques with modern tools, resulting in a piece that balances elegance and functionality. Here’s how I brought this table to life for my Denver Client.
Building a Craftsman Style Bench
I built a Craftsman-style bench with storage. The design cues for this bench came from my client's Denver home, which was built in the craftsman style. Specific details I pulled from their home were the rope molding corresponding to the rope bolding in the wainscotting.
Building a Platform Bed
In this episode, I build a platform bed with a sheepskin headboard for a Colorado Springs Client. The bed is made from walnut and features four floating shelves attached to the headboard. Each side of the bed has an integrated reading light.
Building a Walnut Vanity with a Live Edge Backspalsh
In this episode, I build a Custom walnut vanity with a live-edge backsplash. This Colorado Springs client wanted a contemporary floating custom vanity with some rustic appeal. To accomplish this, we created a vanity with a beautiful contemporary look and added a live-edge backsplash to give it that Mountain Modern look.
Custom Wood Inlay on Box Lid
This is a memorial box for a little girl who passed from epilepsy. Her name is Clair, and the nurses who cared for her called her Clair Bear, so we decided an appropriate inlay was bear. Each piece of wood was selected for its natural color to tell the story and was inlayed by hand.
Building an Asian Inspired Keepsake Box
In this episode, I build a custom asian inspired keepsake box. The Keepsake box sides are made from bamboo, and the top and legs are cherry. If you are into woodworking and want to make this box, I do have "How To Plans" available for this project.
Building Floating Shelves for a Client’s Master Bath
A client needed a place to display his grandfather's shaving kit and a few other collectibles. Here's how I designed and built the floating shelves to hold them.
Building a Craftsman Style Staircase and Handrail
In this episode, I help a Colorado Springs Client remodel their staircase. The existing staircase was a straight run with an outdated style. I redesigned it to have open-ended steps with a craftsman handrail.
Building a Entry Table With Walnut Cuffs
In this episode, I build a custom entry table with walnut cuffs. The main table is made from cherry, and the feet are adorned with decorative walnut cuffs.
Learning to Patinate and Bend Metal
Today's project is more than just building a pendant lamp. I really believe that to continue growing as an artist, you have to always be experimenting, trying new techniques, and working in new mediums.
Building a Scandinavian Round Table
I took my time building this round table. I’m thrilled with the result—a sleek, Scandinavian-inspired table with Midcentury undertones.
Building a Custom Rustic Steel Dining Table Base
Building a custom rustic steel dining table base, from welding and acid treatment to creating unique rust patinas with vinegar and finishing with weighted concrete for stability
Making a Wooden Ice Bucket
Today's project is to build a decorative wooden ice bucket for a bar cart I constructed earlier. This isn't a functional piece meant to hold water; it's a prop, designed solely to add visual interest and character to my home bar setup.
Building a Sculpture that Doubles as a Coat Rack
building a sculptural two-moon coat rack, from grain-matched bandsaw cuts and CNC joinery fixtures to hand-shaped hooks and a hidden wall-mount system.
DIY Barn Door Guide
A while ago, I built a barn door with a steel frame that encased the wood for a client in Denver, Colorado. It turned out great, but one question kept coming up: How did I keep the bottom of the door from swinging around? Most barn door hardware kits include a T-track that gets screwed into the floor, with a slot routed into the bottom of the door for guidance. But since my door had a steel base, routing a groove wasn’t an option.
Architectural Components
