Building a Reception Desk for Local Art Gallery

Today, I’m excited to share my latest project—a custom reception desk for a local art gallery! This piece isn’t just functional; it’s designed to enhance the gallery’s aesthetic while keeping operations smooth. The desk features a hidden drawer for storing packing paper (to safely wrap sold artwork), display corners for featured pieces, and plenty of cabinets and cubbies to keep everything organized.  The desk is made from cherry and accented with frosted glass.

Step 1: Building the Cabinets

Since all the cabinets were the same height, I started by ripping the sides to width on the table saw and cutting them to length with a track saw. After referencing my cut list, I set up a stacked dado blade to cut all the shelf dados at once. Then, I adjusted the dado stack to cut rabbets for the backs, bottoms, and top braces.

Cabinet construction is straightforward, but ensuring everything stays square during assembly is crucial. I pre-sanded and pre-finished some parts that would be tricky to finish later. For assembly, I used wood glue and a few staples for reinforcement. Each cabinet was slightly customized—some were sized for a printer, while others accommodated shopping bags and other essentials.

To simplify installation, I built the toe kick separately. Using offcuts from the cabinets, I ripped them to width and constructed a base. Cleats stapled to the cabinet bottoms allowed them to clip into the toe kick, making alignment and on-site assembly much easier.

Step 2: Crafting the Legs

The legs taper from about 3.5 inches at the bottom to a few inches at the top. To achieve this, I laminated 8/4 material, planed it smooth, and carefully matched grain patterns to hide glue seams. After the glue dried, I cleaned up the joints and cut the legs to length.

A custom jig helped me cut the tapers on the bandsaw. Since the legs taper on multiple sides, I saved the first cutoff to use as a spacer for the remaining cuts.

Step 3: Decorative Panels & Frame Assembly

For the lower decorative panels, I book-matched 5/4 material, ensuring a seamless grain pattern. After glue-up, I ran them through the planer for a smooth finish.

The frame was built using 1/4 stock, with dados cut for the panels and a large rabbet for glass installation. I opted for two passes with a standard blade instead of a dado stack to avoid burning and ensure a cleaner cut.

Stopped dados on the legs were routed out, and I squared the ends with a chisel. The center dividers needed stopped rabbets for the glass gridwork, so I used a router with a plywood fence for stability.

Step 4: Hidden Drawer for Packing Paper

The hidden drawer was a fun challenge. I cut matching dados in two boards—one for the slide and one for the glide. The drawer front is secured with dowels for strength, and the extended back acts as a cantilever, preventing tipping when fully extended. A bit of paste wax ensured smooth operation.

Step 5: Glass Installation & Final Details

A local glass shop provided frosted glass panels, which I carefully measured and cut (though I did break one—always order extra!). Quarter-inch hardwood strips were pinned in place to hold the glass securely.

For the filing cabinet drawers, I used a Leigh dovetail jig for precision. Blum soft-close hardware was installed (ignoring the confusing instructions at first) with the help of a jig for accurate hole placement.

Step 6: The Desk Top & Final Assembly

The desk top was made from 1/4 stock with floating tenons for alignment. After glue-up, I sanded and finished it before installing LED strip lighting under the top and shelves.

Due to its size, I could only test-fit the desk in sections in my shop. The final piece now resides at the Hunter Wolfe Art Gallery in Old Colorado City—if you’re nearby, stop in and check it out!

Final Thoughts

This project was a great blend of functionality and craftsmanship. If you enjoyed this breakdown, consider subscribing to my channel for more builds, and a huge thanks to my Patreon supporters for making these projects possible!

More Project Build Videos

Building a Dr. Seuss Inspired Coat Rack

How a straight 4x4 becomes a whimsical, Dr. Seuss-inspired coat rack using a band saw inside-out cutting technique, plus a hand-cut castle joint base.

Building a Fireplace Mantel

In this episode, I designed and built a Craftsman-style fireplace mantel for a client in Colorado Springs.  The mantel was made from hickory and stained to match some of the other millwork in the house.  

Building Modern Contemporary Doors

In this episode, I build a whole house of Modern Contemporary Doors featuring a stainless steel accent for my Colorado Springs client's home.

Asymmetrical Shelf Build

I recently completed an asymmetrical shelf unit for a client, and let me tell you, it was one of those projects that looks simple on the surface but requires serious attention to detail from start to finish.

Installing a Door Lock on a Custom Door

I have installed Door locks of all varieties over the years, from different setback to full mortise locks.  In this episode, I show how to install a door lock and deadbolt set for my custom copper door project.  This was a custom door for a client in Evergreen, Colorado, just outside of Denver.

Building a Nakashima-Inspired Live-Edge Walnut Table

Crafting a live-edge walnut table inspired by the legendary woodworker George Nakashima. The build combines traditional joinery techniques with modern tools, resulting in a piece that balances elegance and functionality. Here’s how I brought this table to life for my Denver Client.

Building a Craftsman Style Bench

I built a Craftsman-style bench with storage.  The design cues for this bench came from my client's Denver home, which was built in the craftsman style.  Specific details I pulled from their home were the rope molding corresponding to the rope bolding in the wainscotting. 

Building a Platform Bed

In this episode, I build a platform bed with a sheepskin headboard for a Colorado Springs Client.  The bed is made from walnut and features four floating shelves attached to the headboard. Each side of the bed has an integrated reading light.

Building a Walnut Vanity with a Live Edge Backspalsh

In this episode, I build a Custom walnut vanity with a live-edge backsplash. This Colorado Springs client wanted a contemporary floating custom vanity with some rustic appeal. To accomplish this, we created a vanity with a beautiful contemporary look and added a live-edge backsplash to give it that Mountain Modern look.  

Custom Wood Inlay on Box Lid

This is a memorial box for a little girl who passed from epilepsy.  Her name is Clair, and the nurses who cared for her called her Clair Bear, so we decided an appropriate inlay was bear.  Each piece of wood was selected for its natural color to tell the story and was inlayed by hand.

Building an Asian Inspired Keepsake Box

In this episode, I build a custom asian inspired keepsake box. The Keepsake box sides are made from bamboo, and the top and legs are cherry. If you are into woodworking and want to make this box, I do have "How To Plans" available for this project.

Building Floating Shelves for a Client’s Master Bath

A client needed a place to display his grandfather's shaving kit and a few other collectibles. Here's how I designed and built the floating shelves to hold them.

Building a Craftsman Style Staircase and Handrail

In this episode, I help a Colorado Springs Client remodel their staircase. The existing staircase was a straight run with an outdated style. I redesigned it to have open-ended steps with a craftsman handrail.

Building a Entry Table With Walnut Cuffs

In this episode, I build a custom entry table with walnut cuffs.  The main table is made from cherry, and the feet are adorned with decorative walnut cuffs.

Learning to Patinate and Bend Metal 

Today's project is more than just building a pendant lamp. I really believe that to continue growing as an artist, you have to always be experimenting, trying new techniques, and working in new mediums.

Building a Scandinavian Round Table

I took my time building this round table. I’m thrilled with the result—a sleek, Scandinavian-inspired table with Midcentury undertones.

Building a Custom Rustic Steel Dining Table Base

Building a custom rustic steel dining table base, from welding and acid treatment to creating unique rust patinas with vinegar and finishing with weighted concrete for stability

Making a Wooden Ice Bucket

Today's project is to build a decorative wooden ice bucket for a bar cart I constructed earlier. This isn't a functional piece meant to hold water; it's a prop, designed solely to add visual interest and character to my home bar setup.

Building a Sculpture that Doubles as a Coat Rack

building a sculptural two-moon coat rack, from grain-matched bandsaw cuts and CNC joinery fixtures to hand-shaped hooks and a hidden wall-mount system.

DIY Barn Door Guide

A while ago, I built a barn door with a steel frame that encased the wood for a client in Denver, Colorado. It turned out great, but one question kept coming up: How did I keep the bottom of the door from swinging around? Most barn door hardware kits include a T-track that gets screwed into the floor, with a slot routed into the bottom of the door for guidance. But since my door had a steel base, routing a groove wasn’t an option.

Custom Desks

Cherry Writing Desk

Reception Desk for an Art Gallery

Executive Desk With Copper Accent