Building a Japanese Inspired Bench

How to Craft a Japanese-Inspired Bench: Carving, Bowties, and Joinery

Today, I’m excited to share my process of building a Mountain Contemporary Japanese-inspired bench featuring a hand-carved crack with decorative bowtie inlays. Along the way, I’ll explore three or four different types of joinery to bring this piece together. This project was originally built for a Manitou Springs Custom Furniture Client.

Step 1: Preparing the Bench Top

I started by cutting 8/4 cherry boards to approximate the length for the bench top. While a live-edge slab with a natural crack would have been ideal, using standard cherry was more cost-effective, and I could control exactly where the “crack” would go.

After milling the pieces, I arranged them to hide the glue line, ensuring the grain flowed naturally. Once satisfied, I used tracing paper to map out the crack’s path, following the wood’s grain to make it look as organic as possible. Carbon paper (yes, it still exists!) helped transfer my design onto the workpiece.

Carving the Crack

Using a power carver on an angle grinder, I carefully shaped the crack, starting at the top and working downward. A soft pad on my random orbit sander smoothed out the grinding marks. On the opposite side, I removed bulk material from the bottom and feathered it upward to meet my layout line.

To enhance the crack’s realism, I applied a dark brown dye stain, then misted it with water to create a weathered effect. After speeding up drying with a heat gun, I sealed it with shellac to prevent any dye transfer onto clothing. A quick pass with 0000 steel wool toned down the shine.

Floating Tenons for Alignment

Before glue-up, I mortised the edges for floating tenons to ensure perfect alignment.

Step 2: Inlaying the Bowties

I experimented with different bowtie sizes and shapes on paper before settling on a layout. Using spray adhesive, I attached the templates to walnut scraps and cut them out on the bandsaw.

Double-sided tape held each bowtie in place while I traced around them with a razor blade. This created a precise outline for chiseling.

Chiseling the Inlay

Starting just inside the razor line, I removed waste in small increments to avoid compressing the wood fibers. After several test fits and adjustments, I glued each bowtie in place, planed it flush, and used steam to swell any compressed grain for a tight fit.

Step 3: Building the Legs & Joinery

I laminated 8/4 lumber for the legs, carefully matching grain to hide glue lines. After squaring the ends, I cut bridle joints on the table saw using a shop-made sled, taking shallow passes to avoid blade strain.

Tapering the Legs

A quick tapering jig on the bandsaw (made from scrap plywood) helped shape all four sides of each leg. The jointer cleaned up saw marks, leaving smooth, even tapers.

Upper Rails & Curves

I shaped the upper rails using a template and double-sided tape. After rough-cutting at the bandsaw, I routed the curves with a flush-trim bit, switching between top and bottom bearings to avoid tearout.

Step 4: Mortise & Tenon for the Lower Stretcher

Finding the leg’s center, I marked mortises and used a mortising attachment (shimmed for squareness) to chop them out. A chisel cleaned up rough walls.

For the stretcher tenons, I measured each leg’s angle individually (since slight variations existed from tapering) and cut matching angles on the table saw. Hand-sawing and chiseling finished the shoulders.

Step 5: The Trestle & Final Assembly

Before making the trestle, I dry-fit the legs to determine spacing. Using a naturally curved piece of wood, I traced an arch with a flexible strip and a nail as a pivot point.

Half-Lap Joints

A dado blade cuts half-laps on the trestle and stretchers. After test-fitting, I bandsawed the curve, smoothed it with disk and spindle sanders, and hand-sanded any imperfections.

Final Thoughts

This project combined carving, inlay, and multiple joinery techniques to create a functional yet artistic Mountain Contemporary bench.

More Project Build Videos

Building a Dr. Seuss Inspired Coat Rack

How a straight 4x4 becomes a whimsical, Dr. Seuss-inspired coat rack using a band saw inside-out cutting technique, plus a hand-cut castle joint base.

Building a Fireplace Mantel

In this episode, I designed and built a Craftsman-style fireplace mantel for a client in Colorado Springs.  The mantel was made from hickory and stained to match some of the other millwork in the house.  

Building Modern Contemporary Doors

In this episode, I build a whole house of Modern Contemporary Doors featuring a stainless steel accent for my Colorado Springs client's home.

Asymmetrical Shelf Build

I recently completed an asymmetrical shelf unit for a client, and let me tell you, it was one of those projects that looks simple on the surface but requires serious attention to detail from start to finish.

Installing a Door Lock on a Custom Door

I have installed Door locks of all varieties over the years, from different setback to full mortise locks.  In this episode, I show how to install a door lock and deadbolt set for my custom copper door project.  This was a custom door for a client in Evergreen, Colorado, just outside of Denver.

Building a Nakashima-Inspired Live-Edge Walnut Table

Crafting a live-edge walnut table inspired by the legendary woodworker George Nakashima. The build combines traditional joinery techniques with modern tools, resulting in a piece that balances elegance and functionality. Here’s how I brought this table to life for my Denver Client.

Building a Craftsman Style Bench

I built a Craftsman-style bench with storage.  The design cues for this bench came from my client's Denver home, which was built in the craftsman style.  Specific details I pulled from their home were the rope molding corresponding to the rope bolding in the wainscotting. 

Building a Platform Bed

In this episode, I build a platform bed with a sheepskin headboard for a Colorado Springs Client.  The bed is made from walnut and features four floating shelves attached to the headboard. Each side of the bed has an integrated reading light.

Building a Walnut Vanity with a Live Edge Backspalsh

In this episode, I build a Custom walnut vanity with a live-edge backsplash. This Colorado Springs client wanted a contemporary floating custom vanity with some rustic appeal. To accomplish this, we created a vanity with a beautiful contemporary look and added a live-edge backsplash to give it that Mountain Modern look.  

Custom Wood Inlay on Box Lid

This is a memorial box for a little girl who passed from epilepsy.  Her name is Clair, and the nurses who cared for her called her Clair Bear, so we decided an appropriate inlay was bear.  Each piece of wood was selected for its natural color to tell the story and was inlayed by hand.

Building an Asian Inspired Keepsake Box

In this episode, I build a custom asian inspired keepsake box. The Keepsake box sides are made from bamboo, and the top and legs are cherry. If you are into woodworking and want to make this box, I do have "How To Plans" available for this project.

Building Floating Shelves for a Client’s Master Bath

A client needed a place to display his grandfather's shaving kit and a few other collectibles. Here's how I designed and built the floating shelves to hold them.

Building a Craftsman Style Staircase and Handrail

In this episode, I help a Colorado Springs Client remodel their staircase. The existing staircase was a straight run with an outdated style. I redesigned it to have open-ended steps with a craftsman handrail.

Building a Entry Table With Walnut Cuffs

In this episode, I build a custom entry table with walnut cuffs.  The main table is made from cherry, and the feet are adorned with decorative walnut cuffs.

Learning to Patinate and Bend Metal 

Today's project is more than just building a pendant lamp. I really believe that to continue growing as an artist, you have to always be experimenting, trying new techniques, and working in new mediums.

Building a Scandinavian Round Table

I took my time building this round table. I’m thrilled with the result—a sleek, Scandinavian-inspired table with Midcentury undertones.

Building a Custom Rustic Steel Dining Table Base

Building a custom rustic steel dining table base, from welding and acid treatment to creating unique rust patinas with vinegar and finishing with weighted concrete for stability

Making a Wooden Ice Bucket

Today's project is to build a decorative wooden ice bucket for a bar cart I constructed earlier. This isn't a functional piece meant to hold water; it's a prop, designed solely to add visual interest and character to my home bar setup.

Building a Sculpture that Doubles as a Coat Rack

building a sculptural two-moon coat rack, from grain-matched bandsaw cuts and CNC joinery fixtures to hand-shaped hooks and a hidden wall-mount system.

DIY Barn Door Guide

A while ago, I built a barn door with a steel frame that encased the wood for a client in Denver, Colorado. It turned out great, but one question kept coming up: How did I keep the bottom of the door from swinging around? Most barn door hardware kits include a T-track that gets screwed into the floor, with a slot routed into the bottom of the door for guidance. But since my door had a steel base, routing a groove wasn’t an option.

Benches

Contemporary Bench With Mitered Legs

Maple Bench

Craftsman Bench With Storage

Japanese Contemplation Bench

Mountain Contemporary Bench

Stone Meditation Bench