Building a Bench with a Stone Leg

A Unique Woodworking Journey

Woodworking often blends creativity, craftsmanship, and problem-solving. In this project, I set out to build a bench unlike any other—one that incorporates a massive granite boulder as a leg, refined joinery, and an elegant wooden arch. This custom bench project was built for a Colorado Springs Client.  Here’s how it all came together.

The Stone Leg: The Most Demanding Part

The project began with the most physically challenging task—working with the granite boulder. Since the stone was too heavy to lift alone, I used an engine hoist to move it from my truck. Once positioned, I scored the base with an angle grinder and broke off the excess with a coal chisel to reduce weight.

But that wasn’t enough—I wanted the bench to be movable by one person, so I spent an entire day hollowing out the rock with a 4-inch angle grinder. By the end, my arms felt like they’d grown three sizes!

Inspiration Behind the Design

The idea for this bench came from architect Erick of 35×40 Design. He once designed a house where a boulder was craned through the roof to become a fireplace. That got me thinking: How can I incorporate raw stone into fine woodworking?

After some brainstorming—and a hike through Oregon’s Cascades—the vision clicked: a bench that bridges organic stone with precise joinery.

Carving the Bench Top to Fit the Stone

With the rock hollowed and manageable, I milled lumber for the bench top. The next challenge? Carving an opening in the wood to fit the irregular stone shape.

1. Initial Layout: I drilled holes and chiseled out the rough shape.
2. Tracing & Refining: Placing the board over the stone, I traced the outline from underneath.
3. Power Carving: Using an angle grinder with a carving disk, I removed material up to the marked line.
4. Final Fit: As I got closer, I switched to rasps and files for precision, ensuring a snug but slightly loose fit to allow for wood movement.

Constructing the Wooden Arch & Supports

The bench’s arched backrest required laminating thin walnut strips around a plywood form. After gluing, I:

• Cut the arch to length with a Japanese pull saw.
• Shaped the ends to match the leg’s angle using a bandsaw and hand plane.
• Hand-cut through-mortises for the cross braces, carefully chiseling to match the arch’s curve.

Assembly & Finishing Touches

Before final assembly:

• I reinforced the hollowed stone with spray foam to prevent cracking.
• Added a steel bracket to secure the wood to the stone, carefully drilling and welding custom-fit rods.
• Applied a water-based dye to the mahogany to enhance its grain.

Finally, I epoxied the arch in place, using screws (later replaced with decorative dowels) for clamping pressure. The last step was bolting the top to the stone—tight enough to hold, but loose enough to allow for wood movement.

Final Thoughts

This project pushed my skills in stone carving, joinery, and design. The result? A functional yet sculptural bench that blends natural stone with handcrafted wood.

More Project Build Videos

Building a Dr. Seuss Inspired Coat Rack

How a straight 4x4 becomes a whimsical, Dr. Seuss-inspired coat rack using a band saw inside-out cutting technique, plus a hand-cut castle joint base.

Building a Fireplace Mantel

In this episode, I designed and built a Craftsman-style fireplace mantel for a client in Colorado Springs.  The mantel was made from hickory and stained to match some of the other millwork in the house.  

Building Modern Contemporary Doors

In this episode, I build a whole house of Modern Contemporary Doors featuring a stainless steel accent for my Colorado Springs client's home.

Asymmetrical Shelf Build

I recently completed an asymmetrical shelf unit for a client, and let me tell you, it was one of those projects that looks simple on the surface but requires serious attention to detail from start to finish.

Installing a Door Lock on a Custom Door

I have installed Door locks of all varieties over the years, from different setback to full mortise locks.  In this episode, I show how to install a door lock and deadbolt set for my custom copper door project.  This was a custom door for a client in Evergreen, Colorado, just outside of Denver.

Building a Nakashima-Inspired Live-Edge Walnut Table

Crafting a live-edge walnut table inspired by the legendary woodworker George Nakashima. The build combines traditional joinery techniques with modern tools, resulting in a piece that balances elegance and functionality. Here’s how I brought this table to life for my Denver Client.

Building a Craftsman Style Bench

I built a Craftsman-style bench with storage.  The design cues for this bench came from my client's Denver home, which was built in the craftsman style.  Specific details I pulled from their home were the rope molding corresponding to the rope bolding in the wainscotting. 

Building a Platform Bed

In this episode, I build a platform bed with a sheepskin headboard for a Colorado Springs Client.  The bed is made from walnut and features four floating shelves attached to the headboard. Each side of the bed has an integrated reading light.

Building a Walnut Vanity with a Live Edge Backspalsh

In this episode, I build a Custom walnut vanity with a live-edge backsplash. This Colorado Springs client wanted a contemporary floating custom vanity with some rustic appeal. To accomplish this, we created a vanity with a beautiful contemporary look and added a live-edge backsplash to give it that Mountain Modern look.  

Custom Wood Inlay on Box Lid

This is a memorial box for a little girl who passed from epilepsy.  Her name is Clair, and the nurses who cared for her called her Clair Bear, so we decided an appropriate inlay was bear.  Each piece of wood was selected for its natural color to tell the story and was inlayed by hand.

Building an Asian Inspired Keepsake Box

In this episode, I build a custom asian inspired keepsake box. The Keepsake box sides are made from bamboo, and the top and legs are cherry. If you are into woodworking and want to make this box, I do have "How To Plans" available for this project.

Building Floating Shelves for a Client’s Master Bath

A client needed a place to display his grandfather's shaving kit and a few other collectibles. Here's how I designed and built the floating shelves to hold them.

Building a Craftsman Style Staircase and Handrail

In this episode, I help a Colorado Springs Client remodel their staircase. The existing staircase was a straight run with an outdated style. I redesigned it to have open-ended steps with a craftsman handrail.

Building a Entry Table With Walnut Cuffs

In this episode, I build a custom entry table with walnut cuffs.  The main table is made from cherry, and the feet are adorned with decorative walnut cuffs.

Learning to Patinate and Bend Metal 

Today's project is more than just building a pendant lamp. I really believe that to continue growing as an artist, you have to always be experimenting, trying new techniques, and working in new mediums.

Building a Scandinavian Round Table

I took my time building this round table. I’m thrilled with the result—a sleek, Scandinavian-inspired table with Midcentury undertones.

Building a Custom Rustic Steel Dining Table Base

Building a custom rustic steel dining table base, from welding and acid treatment to creating unique rust patinas with vinegar and finishing with weighted concrete for stability

Making a Wooden Ice Bucket

Today's project is to build a decorative wooden ice bucket for a bar cart I constructed earlier. This isn't a functional piece meant to hold water; it's a prop, designed solely to add visual interest and character to my home bar setup.

Building a Sculpture that Doubles as a Coat Rack

building a sculptural two-moon coat rack, from grain-matched bandsaw cuts and CNC joinery fixtures to hand-shaped hooks and a hidden wall-mount system.

DIY Barn Door Guide

A while ago, I built a barn door with a steel frame that encased the wood for a client in Denver, Colorado. It turned out great, but one question kept coming up: How did I keep the bottom of the door from swinging around? Most barn door hardware kits include a T-track that gets screwed into the floor, with a slot routed into the bottom of the door for guidance. But since my door had a steel base, routing a groove wasn’t an option.

Benches

Contemporary Bench With Mitered Legs

Maple Bench

Craftsman Bench With Storage

Japanese Contemplation Bench

Mountain Contemporary Bench

Stone Meditation Bench